Presented by: Ashwin (Microsoft Azure MVP)
BADNEWS is malware that has been used by the actors responsible for the Patchwork campaign. Its name was given due to its use of RSS feeds, forums, and blogs for command and control.
Source:
MITRE ATT&CK® Matrix for Enterprise
Now, let's see the details around the series of events associated with this software in chronological order, and how we can work to mitigate or detect these threats.
BADNEWS creates a scheduled task to establish by executing a malicious payload every subsequent minute.
Adversaries may abuse the Windows Task Scheduler to perform task scheduling for initial or recurring execution of malicious code. There are multiple ways to access the Task Scheduler in Windows. The schtasks utility can be run directly on the command line, or the Task Scheduler can be opened through the GUI within the Administrator Tools section of the Control Panel. In some cases, adversaries have used a .NET wrapper for the Windows Task Scheduler, and alternatively, adversaries have used the Windows netapi32 library to create a scheduled task.
The deprecated at utility could also be abused by adversaries (ex: At), though at.exe can not access tasks created with schtasks or the Control Panel.
An adversary may use Windows Task Scheduler to execute programs at system startup or on a scheduled basis for persistence. The Windows Task Scheduler can also be abused to conduct remote Execution as part of Lateral Movement and/or to run a process under the context of a specified account (such as SYSTEM). Similar to System Binary Proxy Execution, adversaries have also abused the Windows Task Scheduler to potentially mask one-time execution under signed/trusted system processes.
Audit
Toolkits like the PowerSploit framework contain PowerUp modules that can be used to explore systems for permission weaknesses in scheduled tasks that could be used to escalate privileges.
Operating System Configuration
Configure settings for scheduled tasks to force tasks to run under the context of the authenticated account instead of allowing them to run as SYSTEM. The associated Registry key is located at HKLM\SYSTEM\CurrentControlSet\Control\Lsa\SubmitControl. The setting can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > Security Options: Domain Controller: Allow server operators to schedule tasks, set to disabled.
Privileged Account Management
Configure the Increase Scheduling Priority option to only allow the Administrators group the rights to schedule a priority process. This can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > User Rights Assignment: Increase scheduling priority.
User Account Management
Limit privileges of user accounts and remediate Privilege Escalation vectors so only authorized administrators can create scheduled tasks on remote systems.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to gather tasks may also be created through Windows system management tools such as Windows Management Instrumentation and PowerShell, so additional logging may need to be configured to gather the appropriate data.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor Windows Task Scheduler stores in %systemroot%\System32\Tasks for change entries related to scheduled tasks that do not correlate with known software, patch cycles, etc.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly constructed processes and/or command-lines that execute from the svchost.exe in Windows 10 and the Windows Task Scheduler taskeng.exe for older versions of Windows. If scheduled tasks are not used for persistence, then the adversary is likely to remove the task when the action is complete.
Scheduled Job: Scheduled Job Creation
Initial construction of a new scheduled job (ex: Windows EID 4698 or /var/log cron logs)
Monitor for newly constructed scheduled jobs by enabling the "Microsoft-Windows-TaskScheduler/Operational" setting within the event logging service. Several events will then be logged on scheduled task activity, including: Event ID 106 on Windows 7, Server 2008 R2 - Scheduled task registered; Event ID 4698 on Windows 10, Server 2016 - Scheduled task created;Event ID 4700 on Windows 10, Server 2016 - Scheduled task enabled;Event ID 4701 on Windows 10, Server 2016 - Scheduled task disabled
BADNEWS is capable of executing commands via cmd.exe.
Adversaries may abuse the Windows command shell for execution. The Windows command shell (cmd) is the primary command prompt on Windows systems. The Windows command prompt can be used to control almost any aspect of a system, with various permission levels required for different subsets of commands. The command prompt can be invoked remotely via Remote Services such as SSH.
Batch files (ex: .bat or .cmd) also provide the shell with a list of sequential commands to run, as well as normal scripting operations such as conditionals and loops. Common uses of batch files include long or repetitive tasks, or the need to run the same set of commands on multiple systems.
Adversaries may leverage cmd to execute various commands and payloads. Common uses include cmd to execute a single command, or abusing cmd interactively with input and output forwarded over a command and control channel.
Execution Prevention
Use application control where appropriate.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may abuse the Windows command shell for execution. Usage of the Windows command shell may be common on administrator, developer, or power user systems depending on job function. If scripting is restricted for normal users, then any attempt to enable scripts running on a system would be considered suspicious. If scripts are not commonly used on a system, but enabled, scripts running out of cycle from patching or other administrator functions are suspicious. Scripts should be captured from the file system when possible to determine their actions and intent.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly executed processes that may abuse the Windows command shell for execution.
BADNEWS has a command to download an .exe and execute it via CreateProcess API. It can also run with ShellExecute.
Adversaries may interact with the native OS application programming interface (API) to execute behaviors. Native APIs provide a controlled means of calling low-level OS services within the kernel, such as those involving hardware/devices, memory, and processes. These native APIs are leveraged by the OS during system boot (when other system components are not yet initialized) as well as carrying out tasks and requests during routine operations.
Native API functions (such as NtCreateProcess) may be directed invoked via system calls / syscalls, but these features are also often exposed to user-mode applications via interfaces and libraries. For example, functions such as the Windows API CreateProcess() or GNU fork() will allow programs and scripts to start other processes. This may allow API callers to execute a binary, run a CLI command, load modules, etc. as thousands of similar API functions exist for various system operations.
Higher level software frameworks, such as Microsoft .NET and macOS Cocoa, are also available to interact with native APIs. These frameworks typically provide language wrappers/abstractions to API functionalities and are designed for ease-of-use/portability of code.
Adversaries may abuse these OS API functions as a means of executing behaviors. Similar to Command and Scripting Interpreter, the native API and its hierarchy of interfaces provide mechanisms to interact with and utilize various components of a victimized system. While invoking API functions, adversaries may also attempt to bypass defensive tools (ex: unhooking monitored functions via Disable or Modify Tools).
Behavior Prevention on Endpoint
On Windows 10, enable Attack Surface Reduction (ASR) rules to prevent Office VBA macros from calling Win32 APIs.
Execution Prevention
Identify and block potentially malicious software executed that may be executed through this technique by using application control tools, like Windows Defender Application Control, AppLocker, or Software Restriction Policies where appropriate.
Monitoring the following activities in your Organization can help you detect this technique.
Module: Module Load
Attaching a module into the memory of a process/program, typically to access shared resources/features provided by the module (ex: Sysmon EID 7)
Monitor DLL/PE file events, specifically creation of these binary files as well as the loading of DLLs into processes. Utilization of the Windows APIs may involve processes loading/accessing system DLLs associated with providing called functions (ex: ntdll.dll, kernel32.dll, advapi32.dll, user32.dll, and gdi32.dll). Monitoring for DLL loads, especially to abnormal/unusual or potentially malicious processes, may indicate abuse of the Windows API. Though noisy, this data can be combined with other indicators to identify adversary activity.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitoring API calls may generate a significant amount of data and may not be useful for defense unless collected under specific circumstances, since benign use of API functions are common and may be difficult to distinguish from malicious behavior. Correlation of other events with behavior surrounding API function calls using API monitoring will provide additional context to an event that may assist in determining if it is due to malicious behavior. Correlation of activity by process lineage by process ID may be sufficient.
BADNEWS creates a scheduled task to establish by executing a malicious payload every subsequent minute.
Adversaries may abuse the Windows Task Scheduler to perform task scheduling for initial or recurring execution of malicious code. There are multiple ways to access the Task Scheduler in Windows. The schtasks utility can be run directly on the command line, or the Task Scheduler can be opened through the GUI within the Administrator Tools section of the Control Panel. In some cases, adversaries have used a .NET wrapper for the Windows Task Scheduler, and alternatively, adversaries have used the Windows netapi32 library to create a scheduled task.
The deprecated at utility could also be abused by adversaries (ex: At), though at.exe can not access tasks created with schtasks or the Control Panel.
An adversary may use Windows Task Scheduler to execute programs at system startup or on a scheduled basis for persistence. The Windows Task Scheduler can also be abused to conduct remote Execution as part of Lateral Movement and/or to run a process under the context of a specified account (such as SYSTEM). Similar to System Binary Proxy Execution, adversaries have also abused the Windows Task Scheduler to potentially mask one-time execution under signed/trusted system processes.
Audit
Toolkits like the PowerSploit framework contain PowerUp modules that can be used to explore systems for permission weaknesses in scheduled tasks that could be used to escalate privileges.
Operating System Configuration
Configure settings for scheduled tasks to force tasks to run under the context of the authenticated account instead of allowing them to run as SYSTEM. The associated Registry key is located at HKLM\SYSTEM\CurrentControlSet\Control\Lsa\SubmitControl. The setting can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > Security Options: Domain Controller: Allow server operators to schedule tasks, set to disabled.
Privileged Account Management
Configure the Increase Scheduling Priority option to only allow the Administrators group the rights to schedule a priority process. This can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > User Rights Assignment: Increase scheduling priority.
User Account Management
Limit privileges of user accounts and remediate Privilege Escalation vectors so only authorized administrators can create scheduled tasks on remote systems.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to gather tasks may also be created through Windows system management tools such as Windows Management Instrumentation and PowerShell, so additional logging may need to be configured to gather the appropriate data.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor Windows Task Scheduler stores in %systemroot%\System32\Tasks for change entries related to scheduled tasks that do not correlate with known software, patch cycles, etc.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly constructed processes and/or command-lines that execute from the svchost.exe in Windows 10 and the Windows Task Scheduler taskeng.exe for older versions of Windows. If scheduled tasks are not used for persistence, then the adversary is likely to remove the task when the action is complete.
Scheduled Job: Scheduled Job Creation
Initial construction of a new scheduled job (ex: Windows EID 4698 or /var/log cron logs)
Monitor for newly constructed scheduled jobs by enabling the "Microsoft-Windows-TaskScheduler/Operational" setting within the event logging service. Several events will then be logged on scheduled task activity, including: Event ID 106 on Windows 7, Server 2008 R2 - Scheduled task registered; Event ID 4698 on Windows 10, Server 2016 - Scheduled task created;Event ID 4700 on Windows 10, Server 2016 - Scheduled task enabled;Event ID 4701 on Windows 10, Server 2016 - Scheduled task disabled
BADNEWS installs a registry Run key to establish persistence.
Adversaries may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key. Adding an entry to the "run keys" in the Registry or startup folder will cause the program referenced to be executed when a user logs in. These programs will be executed under the context of the user and will have the account's associated permissions level.
Placing a program within a startup folder will also cause that program to execute when a user logs in. There is a startup folder location for individual user accounts as well as a system-wide startup folder that will be checked regardless of which user account logs in. The startup folder path for the current user is C:\Users\[Username]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup. The startup folder path for all users is C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp.
The following run keys are created by default on Windows systems:
Run keys may exist under multiple hives. The HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnceEx is also available but is not created by default on Windows Vista and newer. Registry run key entries can reference programs directly or list them as a dependency. For example, it is possible to load a DLL at logon using a "Depend" key with RunOnceEx: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx\0001\Depend /v 1 /d "C:\temp\evil[.]dll"
The following Registry keys can be used to set startup folder items for persistence:
The following Registry keys can control automatic startup of services during boot:
Using policy settings to specify startup programs creates corresponding values in either of two Registry keys:
The Winlogon key controls actions that occur when a user logs on to a computer running Windows 7. Most of these actions are under the control of the operating system, but you can also add custom actions here. The HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Userinit and HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell subkeys can automatically launch programs.
Programs listed in the load value of the registry key HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows run when any user logs on.
By default, the multistring BootExecute value of the registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager is set to autocheck autochk *. This value causes Windows, at startup, to check the file-system integrity of the hard disks if the system has been shut down abnormally. Adversaries can add other programs or processes to this registry value which will automatically launch at boot.
Adversaries can use these configuration locations to execute malware, such as remote access tools, to maintain persistence through system reboots. Adversaries may also use Masquerading to make the Registry entries look as if they are associated with legitimate programs.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor the start folder for additions or changes. Tools such as Sysinternals Autoruns may also be used to detect system changes that could be attempts at persistence, including the startup folders.
Windows Registry: Windows Registry Key Creation
Initial construction of a new Registry Key (ex: Windows EID 4656 or Sysmon EID 12)
Monitor for newly created windows registry keys that may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key.
Windows Registry: Windows Registry Key Modification
Changes made to a Registry Key and/or Key value (ex: Windows EID 4657 or Sysmon EID 13|14)
Monitor Registry for changes to run keys that do not correlate with known software, patch cycles, etc. Tools such as Sysinternals Autoruns may also be used to detect system changes that could be attempts at persistence, including listing the run keys' Registry locations.
BADNEWS typically loads its DLL file into a legitimate signed Java or VMware executable.
Adversaries may execute their own malicious payloads by side-loading DLLs. Similar to DLL Search Order Hijacking, side-loading involves hijacking which DLL a program loads. But rather than just planting the DLL within the search order of a program then waiting for the victim application to be invoked, adversaries may directly side-load their payloads by planting then invoking a legitimate application that executes their payload(s).
Side-loading takes advantage of the DLL search order used by the loader by positioning both the victim application and malicious payload(s) alongside each other. Adversaries likely use side-loading as a means of masking actions they perform under a legitimate, trusted, and potentially elevated system or software process. Benign executables used to side-load payloads may not be flagged during delivery and/or execution. Adversary payloads may also be encrypted/packed or otherwise obfuscated until loaded into the memory of the trusted process.
Application Developer Guidance
When possible, include hash values in manifest files to help prevent side-loading of malicious libraries.
Update Software
Update software regularly to include patches that fix DLL side-loading vulnerabilities.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor for newly constructed files in common folders on the computer system.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor for changes made to files for unexpected modifications to access permissions and attributes
Module: Module Load
Attaching a module into the memory of a process/program, typically to access shared resources/features provided by the module (ex: Sysmon EID 7)
Monitor DLL/PE file events, specifically creation of these binary files as well as the loading of DLLs into processes. Look for DLLs that are not recognized or not normally loaded into a process.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor newly constructed processes for unusual activity (e.g., a process that does not use the network begins to do so) as well as the introduction of new files/programs.
BADNEWS creates a scheduled task to establish by executing a malicious payload every subsequent minute.
Adversaries may abuse the Windows Task Scheduler to perform task scheduling for initial or recurring execution of malicious code. There are multiple ways to access the Task Scheduler in Windows. The schtasks utility can be run directly on the command line, or the Task Scheduler can be opened through the GUI within the Administrator Tools section of the Control Panel. In some cases, adversaries have used a .NET wrapper for the Windows Task Scheduler, and alternatively, adversaries have used the Windows netapi32 library to create a scheduled task.
The deprecated at utility could also be abused by adversaries (ex: At), though at.exe can not access tasks created with schtasks or the Control Panel.
An adversary may use Windows Task Scheduler to execute programs at system startup or on a scheduled basis for persistence. The Windows Task Scheduler can also be abused to conduct remote Execution as part of Lateral Movement and/or to run a process under the context of a specified account (such as SYSTEM). Similar to System Binary Proxy Execution, adversaries have also abused the Windows Task Scheduler to potentially mask one-time execution under signed/trusted system processes.
Audit
Toolkits like the PowerSploit framework contain PowerUp modules that can be used to explore systems for permission weaknesses in scheduled tasks that could be used to escalate privileges.
Operating System Configuration
Configure settings for scheduled tasks to force tasks to run under the context of the authenticated account instead of allowing them to run as SYSTEM. The associated Registry key is located at HKLM\SYSTEM\CurrentControlSet\Control\Lsa\SubmitControl. The setting can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > Security Options: Domain Controller: Allow server operators to schedule tasks, set to disabled.
Privileged Account Management
Configure the Increase Scheduling Priority option to only allow the Administrators group the rights to schedule a priority process. This can be configured through GPO: Computer Configuration > [Policies] > Windows Settings > Security Settings > Local Policies > User Rights Assignment: Increase scheduling priority.
User Account Management
Limit privileges of user accounts and remediate Privilege Escalation vectors so only authorized administrators can create scheduled tasks on remote systems.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to gather tasks may also be created through Windows system management tools such as Windows Management Instrumentation and PowerShell, so additional logging may need to be configured to gather the appropriate data.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor Windows Task Scheduler stores in %systemroot%\System32\Tasks for change entries related to scheduled tasks that do not correlate with known software, patch cycles, etc.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly constructed processes and/or command-lines that execute from the svchost.exe in Windows 10 and the Windows Task Scheduler taskeng.exe for older versions of Windows. If scheduled tasks are not used for persistence, then the adversary is likely to remove the task when the action is complete.
Scheduled Job: Scheduled Job Creation
Initial construction of a new scheduled job (ex: Windows EID 4698 or /var/log cron logs)
Monitor for newly constructed scheduled jobs by enabling the "Microsoft-Windows-TaskScheduler/Operational" setting within the event logging service. Several events will then be logged on scheduled task activity, including: Event ID 106 on Windows 7, Server 2008 R2 - Scheduled task registered; Event ID 4698 on Windows 10, Server 2016 - Scheduled task created;Event ID 4700 on Windows 10, Server 2016 - Scheduled task enabled;Event ID 4701 on Windows 10, Server 2016 - Scheduled task disabled
BADNEWS installs a registry Run key to establish persistence.
Adversaries may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key. Adding an entry to the "run keys" in the Registry or startup folder will cause the program referenced to be executed when a user logs in. These programs will be executed under the context of the user and will have the account's associated permissions level.
Placing a program within a startup folder will also cause that program to execute when a user logs in. There is a startup folder location for individual user accounts as well as a system-wide startup folder that will be checked regardless of which user account logs in. The startup folder path for the current user is C:\Users\[Username]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup. The startup folder path for all users is C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp.
The following run keys are created by default on Windows systems:
Run keys may exist under multiple hives. The HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnceEx is also available but is not created by default on Windows Vista and newer. Registry run key entries can reference programs directly or list them as a dependency. For example, it is possible to load a DLL at logon using a "Depend" key with RunOnceEx: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx\0001\Depend /v 1 /d "C:\temp\evil[.]dll"
The following Registry keys can be used to set startup folder items for persistence:
The following Registry keys can control automatic startup of services during boot:
Using policy settings to specify startup programs creates corresponding values in either of two Registry keys:
The Winlogon key controls actions that occur when a user logs on to a computer running Windows 7. Most of these actions are under the control of the operating system, but you can also add custom actions here. The HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Userinit and HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell subkeys can automatically launch programs.
Programs listed in the load value of the registry key HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows run when any user logs on.
By default, the multistring BootExecute value of the registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager is set to autocheck autochk *. This value causes Windows, at startup, to check the file-system integrity of the hard disks if the system has been shut down abnormally. Adversaries can add other programs or processes to this registry value which will automatically launch at boot.
Adversaries can use these configuration locations to execute malware, such as remote access tools, to maintain persistence through system reboots. Adversaries may also use Masquerading to make the Registry entries look as if they are associated with legitimate programs.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor the start folder for additions or changes. Tools such as Sysinternals Autoruns may also be used to detect system changes that could be attempts at persistence, including the startup folders.
Windows Registry: Windows Registry Key Creation
Initial construction of a new Registry Key (ex: Windows EID 4656 or Sysmon EID 12)
Monitor for newly created windows registry keys that may achieve persistence by adding a program to a startup folder or referencing it with a Registry run key.
Windows Registry: Windows Registry Key Modification
Changes made to a Registry Key and/or Key value (ex: Windows EID 4657 or Sysmon EID 13|14)
Monitor Registry for changes to run keys that do not correlate with known software, patch cycles, etc. Tools such as Sysinternals Autoruns may also be used to detect system changes that could be attempts at persistence, including listing the run keys' Registry locations.
BADNEWS typically loads its DLL file into a legitimate signed Java or VMware executable.
Adversaries may execute their own malicious payloads by side-loading DLLs. Similar to DLL Search Order Hijacking, side-loading involves hijacking which DLL a program loads. But rather than just planting the DLL within the search order of a program then waiting for the victim application to be invoked, adversaries may directly side-load their payloads by planting then invoking a legitimate application that executes their payload(s).
Side-loading takes advantage of the DLL search order used by the loader by positioning both the victim application and malicious payload(s) alongside each other. Adversaries likely use side-loading as a means of masking actions they perform under a legitimate, trusted, and potentially elevated system or software process. Benign executables used to side-load payloads may not be flagged during delivery and/or execution. Adversary payloads may also be encrypted/packed or otherwise obfuscated until loaded into the memory of the trusted process.
Application Developer Guidance
When possible, include hash values in manifest files to help prevent side-loading of malicious libraries.
Update Software
Update software regularly to include patches that fix DLL side-loading vulnerabilities.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor for newly constructed files in common folders on the computer system.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor for changes made to files for unexpected modifications to access permissions and attributes
Module: Module Load
Attaching a module into the memory of a process/program, typically to access shared resources/features provided by the module (ex: Sysmon EID 7)
Monitor DLL/PE file events, specifically creation of these binary files as well as the loading of DLLs into processes. Look for DLLs that are not recognized or not normally loaded into a process.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor newly constructed processes for unusual activity (e.g., a process that does not use the network begins to do so) as well as the introduction of new files/programs.
BADNEWS typically loads its DLL file into a legitimate signed Java or VMware executable.
Adversaries may execute their own malicious payloads by side-loading DLLs. Similar to DLL Search Order Hijacking, side-loading involves hijacking which DLL a program loads. But rather than just planting the DLL within the search order of a program then waiting for the victim application to be invoked, adversaries may directly side-load their payloads by planting then invoking a legitimate application that executes their payload(s).
Side-loading takes advantage of the DLL search order used by the loader by positioning both the victim application and malicious payload(s) alongside each other. Adversaries likely use side-loading as a means of masking actions they perform under a legitimate, trusted, and potentially elevated system or software process. Benign executables used to side-load payloads may not be flagged during delivery and/or execution. Adversary payloads may also be encrypted/packed or otherwise obfuscated until loaded into the memory of the trusted process.
Application Developer Guidance
When possible, include hash values in manifest files to help prevent side-loading of malicious libraries.
Update Software
Update software regularly to include patches that fix DLL side-loading vulnerabilities.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor for newly constructed files in common folders on the computer system.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor for changes made to files for unexpected modifications to access permissions and attributes
Module: Module Load
Attaching a module into the memory of a process/program, typically to access shared resources/features provided by the module (ex: Sysmon EID 7)
Monitor DLL/PE file events, specifically creation of these binary files as well as the loading of DLLs into processes. Look for DLLs that are not recognized or not normally loaded into a process.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor newly constructed processes for unusual activity (e.g., a process that does not use the network begins to do so) as well as the introduction of new files/programs.
BADNEWS is sometimes signed with an invalid Authenticode certificate in an apparent effort to make it look more legitimate.
Adversaries may attempt to mimic features of valid code signatures to increase the chance of deceiving a user, analyst, or tool. Code signing provides a level of authenticity on a binary from the developer and a guarantee that the binary has not been tampered with. Adversaries can copy the metadata and signature information from a signed program, then use it as a template for an unsigned program. Files with invalid code signatures will fail digital signature validation checks, but they may appear more legitimate to users and security tools may improperly handle these files.
Unlike Code Signing, this activity will not result in a valid signature.
Code Signing
Require signed binaries.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Metadata
Contextual data about a file, which may include information such as name, the content (ex: signature, headers, or data/media), user/ower, permissions, etc.
Collect and analyze signing certificate metadata and check signature validity on software that executes within the environment, look for invalid signatures as well as unusual certificate characteristics and outliers.
BADNEWS attempts to hide its payloads using legitimate filenames.
Adversaries may match or approximate the name or location of legitimate files or resources when naming/placing them. This is done for the sake of evading defenses and observation. This may be done by placing an executable in a commonly trusted directory (ex: under System32) or giving it the name of a legitimate, trusted program (ex: svchost.exe). In containerized environments, this may also be done by creating a resource in a namespace that matches the naming convention of a container pod or cluster. Alternatively, a file or container image name given may be a close approximation to legitimate programs/images or something innocuous.
Adversaries may also use the same icon of the file they are trying to mimic.
Code Signing
Require signed binaries and images.
Execution Prevention
Use tools that restrict program execution via application control by attributes other than file name for common operating system utilities that are needed.
Restrict File and Directory Permissions
Use file system access controls to protect folders such as C:\Windows\System32.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Metadata
Contextual data about a file, which may include information such as name, the content (ex: signature, headers, or data/media), user/ower, permissions, etc.
Collect file hashes; file names that do not match their expected hash are suspect. Perform file monitoring; files with known names but in unusual locations are suspect. Likewise, files that are modified outside of an update or patch are suspect.
Image: Image Metadata
Contextual data about a virtual machine image such as name, resource group, state, or type
In containerized environments, use image IDs and layer hashes to compare images instead of relying only on their names. Monitor for the unexpected creation of new resources within your cluster in Kubernetes, especially those created by atypical users.
Process: Process Metadata
Contextual data about a running process, which may include information such as environment variables, image name, user/owner, etc.
Collecting and comparing disk and resource filenames for binaries by looking to see if the InternalName, OriginalFilename, and/or ProductName match what is expected could provide useful leads, but may not always be indicative of malicious activity.
BADNEWS has a command to download an .exe and use process hollowing to inject it into a new process.
Adversaries may inject malicious code into suspended and hollowed processes in order to evade process-based defenses. Process hollowing is a method of executing arbitrary code in the address space of a separate live process.
Process hollowing is commonly performed by creating a process in a suspended state then unmapping/hollowing its memory, which can then be replaced with malicious code. A victim process can be created with native Windows API calls such as CreateProcess, which includes a flag to suspend the processes primary thread. At this point the process can be unmapped using APIs calls such as ZwUnmapViewOfSection or NtUnmapViewOfSection before being written to, realigned to the injected code, and resumed via VirtualAllocEx, WriteProcessMemory, SetThreadContext, then ResumeThread respectively.
This is very similar to Thread Local Storage but creates a new process rather than targeting an existing process. This behavior will likely not result in elevated privileges since the injected process was spawned from (and thus inherits the security context) of the injecting process. However, execution via process hollowing may also evade detection from security products since the execution is masked under a legitimate process.
Behavior Prevention on Endpoint
Some endpoint security solutions can be configured to block some types of process injection based on common sequences of behavior that occur during the injection process.
Monitoring the following activities in your Organization can help you detect this technique.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitoring Windows API calls indicative of the various types of code injection may generate a significant amount of data and may not be directly useful for defense unless collected under specific circumstances for known bad sequences of calls, since benign use of API functions may be common and difficult to distinguish from malicious behavior. Windows API calls such as CreateRemoteThread, SuspendThread/SetThreadContext/ResumeThread, and those that can be used to modify memory within another process, such as VirtualAllocEx/WriteProcessMemory, may be used for this technique.
Process: Process Access
Opening of a process by another process, typically to read memory of the target process (ex: Sysmon EID 10)
Monitor for processes being viewed that may inject malicious code into suspended and hollowed processes in order to evade process-based defenses.
Process: Process Modification
Changes made to a process, or its contents, typically to write and/or execute code in the memory of the target process (ex: Sysmon EID 8)
Monitor for changes made to processes that may inject malicious code into suspended and hollowed processes in order to evade process-based defenses.
BADNEWS typically loads its DLL file into a legitimate signed Java or VMware executable.
Adversaries may execute their own malicious payloads by side-loading DLLs. Similar to DLL Search Order Hijacking, side-loading involves hijacking which DLL a program loads. But rather than just planting the DLL within the search order of a program then waiting for the victim application to be invoked, adversaries may directly side-load their payloads by planting then invoking a legitimate application that executes their payload(s).
Side-loading takes advantage of the DLL search order used by the loader by positioning both the victim application and malicious payload(s) alongside each other. Adversaries likely use side-loading as a means of masking actions they perform under a legitimate, trusted, and potentially elevated system or software process. Benign executables used to side-load payloads may not be flagged during delivery and/or execution. Adversary payloads may also be encrypted/packed or otherwise obfuscated until loaded into the memory of the trusted process.
Application Developer Guidance
When possible, include hash values in manifest files to help prevent side-loading of malicious libraries.
Update Software
Update software regularly to include patches that fix DLL side-loading vulnerabilities.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor for newly constructed files in common folders on the computer system.
File: File Modification
Changes made to a file, or its access permissions and attributes, typically to alter the contents of the targeted file (ex: Windows EID 4670 or Sysmon EID 2)
Monitor for changes made to files for unexpected modifications to access permissions and attributes
Module: Module Load
Attaching a module into the memory of a process/program, typically to access shared resources/features provided by the module (ex: Sysmon EID 7)
Monitor DLL/PE file events, specifically creation of these binary files as well as the loading of DLLs into processes. Look for DLLs that are not recognized or not normally loaded into a process.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor newly constructed processes for unusual activity (e.g., a process that does not use the network begins to do so) as well as the introduction of new files/programs.
When it first starts, BADNEWS spawns a new thread to log keystrokes.
Adversaries may log user keystrokes to intercept credentials as the user types them. Keylogging is likely to be used to acquire credentials for new access opportunities when OS Credential Dumping efforts are not effective, and may require an adversary to intercept keystrokes on a system for a substantial period of time before credentials can be successfully captured.
Keylogging is the most prevalent type of input capture, with many different ways of intercepting keystrokes. Some methods include:
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Driver: Driver Load
Attaching a driver to either user or kernel-mode of a system (ex: Sysmon EID 6)
Monitor for unusual kernel driver installation activity
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for API calls to the SetWindowsHook, GetKeyState, and GetAsyncKeyState. and look for common keylogging API calls. API calls alone are not an indicator of keylogging, but may provide behavioral data that is useful when combined with other information such as new files written to disk and unusual processes.
Windows Registry: Windows Registry Key Modification
Changes made to a Registry Key and/or Key value (ex: Windows EID 4657 or Sysmon EID 13|14)
Monitor for changes made to windows registry keys or values for unexpected modifications
BADNEWS identifies files with certain extensions from USB devices, then copies them to a predefined directory.
Adversaries may enumerate files and directories or may search in specific locations of a host or network share for certain information within a file system. Adversaries may use the information from File and Directory Discovery during automated discovery to shape follow-on behaviors, including whether or not the adversary fully infects the target and/or attempts specific actions.
Many command shell utilities can be used to obtain this information. Examples include dir, tree, ls, find, and locate. Custom tools may also be used to gather file and directory information and interact with the Native API. Adversaries may also leverage a Network Device CLI on network devices to gather file and directory information.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may enumerate files and directories or may search in specific locations of a host or network share for certain information within a file system.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for API calls that may enumerate files and directories or may search in specific locations of a host or network share for certain information within a file system.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor newly executed processes that may enumerate files and directories or may search in specific locations of a host or network share for certain information within a file system.
BADNEWS checks for new hard drives on the victim, such as USB devices, by listening for the WM_DEVICECHANGE window message.
Adversaries may attempt to gather information about attached peripheral devices and components connected to a computer system. Peripheral devices could include auxiliary resources that support a variety of functionalities such as keyboards, printers, cameras, smart card readers, or removable storage. The information may be used to enhance their awareness of the system and network environment or may be used for further actions.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may attempt to gather information about attached peripheral devices and components connected to a computer system.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for API calls that may attempt to gather information about attached peripheral devices and components connected to a computer system.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly executed processes that may attempt to gather information about attached peripheral devices and components connected to a computer system.
When it first starts, BADNEWS crawls the victim's local drives and collects documents with the following extensions: .doc, .docx, .pdf, .ppt, .pptx, and .txt.
Adversaries may search local system sources, such as file systems and configuration files or local databases, to find files of interest and sensitive data prior to Exfiltration.
Adversaries may do this using a Command and Scripting Interpreter, such as cmd as well as a Network Device CLI, which have functionality to interact with the file system to gather information. Adversaries may also use Automated Collection on the local system.
Data Loss Prevention
Data loss prevention can restrict access to sensitive data and detect sensitive data that is unencrypted.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may search and collect local system sources, such as file systems or local databases, to find files of interest and sensitive data prior to Exfiltration. Remote access tools with built-in features may interact directly with the Windows API to gather data. Data may also be acquired through Windows system management tools such as Windows Management Instrumentation and PowerShell.
File: File Access
Opening a file, which makes the file contents available to the requestor (ex: Windows EID 4663)
Monitor for unexpected/abnormal access to files that may be malicious collection of local data, such as user files (pdf, .docx, .jpg, etc.) or local databases.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for API calls that may search local system sources, such as file systems or local databases, to find files of interest and sensitive data prior to Exfiltration.
Process: Process Creation
Birth of a new running process (ex: Sysmon EID 1 or Windows EID 4688)
Monitor for newly executed processes that may search local system sources, such as file systems or local databases, to find files of interest and sensitive data prior to Exfiltration.
Script: Script Execution
Launching a list of commands through a script file (ex: Windows EID 4104)
Monitor for any attempts to enable scripts running on a system would be considered suspicious. If scripts are not commonly used on a system, but enabled, scripts running out of cycle from patching or other administrator functions are suspicious. Scripts should be captured from the file system when possible to determine their actions and intent. Data may also be acquired through Windows system management tools such as Windows Management Instrumentation and PowerShell.
BADNEWS copies files with certain extensions from USB devices toa predefined directory.
Adversaries may search connected removable media on computers they have compromised to find files of interest. Sensitive data can be collected from any removable media (optical disk drive, USB memory, etc.) connected to the compromised system prior to Exfiltration. Interactive command shells may be in use, and common functionality within cmd may be used to gather information.
Some adversaries may also use Automated Collection on removable media.
Data Loss Prevention
Data loss prevention can restrict access to sensitive data and detect sensitive data that is unencrypted.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to collect files from a system's connected removable media. For example, data may be acquired through Windows system management tools such as Windows Management Instrumentation and PowerShell.
File: File Access
Opening a file, which makes the file contents available to the requestor (ex: Windows EID 4663)
Monitor for unexpected/abnormal file accesses to removable media (optical disk drive, USB memory, etc.) connected to the compromised system.
When it first starts, BADNEWS crawls the victim's mapped drives and collects documents with the following extensions: .doc, .docx, .pdf, .ppt, .pptx, and .txt.
Adversaries may search network shares on computers they have compromised to find files of interest. Sensitive data can be collected from remote systems via shared network drives (host shared directory, network file server, etc.) that are accessible from the current system prior to Exfiltration. Interactive command shells may be in use, and common functionality within cmd may be used to gather information.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to collect files from a network share. Remote access tools with built-in features may interact directly with the Windows API to gather and copy to a location. Data may also be acquired and staged through Windows system management tools such as Windows Management Instrumentation and PowerShell.
File: File Access
Opening a file, which makes the file contents available to the requestor (ex: Windows EID 4663)
Monitor for unexpected files (i.e. .pdf, .docx, .jpg, etc.) interacting with network shares.
Network Share: Network Share Access
Opening a network share, which makes the contents available to the requestor (ex: Windows EID 5140 or 5145)
Monitor for unexpected and abnormal accesses to network shares.
When it first starts, BADNEWS spawns a new thread to log keystrokes.
Adversaries may log user keystrokes to intercept credentials as the user types them. Keylogging is likely to be used to acquire credentials for new access opportunities when OS Credential Dumping efforts are not effective, and may require an adversary to intercept keystrokes on a system for a substantial period of time before credentials can be successfully captured.
Keylogging is the most prevalent type of input capture, with many different ways of intercepting keystrokes. Some methods include:
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Driver: Driver Load
Attaching a driver to either user or kernel-mode of a system (ex: Sysmon EID 6)
Monitor for unusual kernel driver installation activity
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for API calls to the SetWindowsHook, GetKeyState, and GetAsyncKeyState. and look for common keylogging API calls. API calls alone are not an indicator of keylogging, but may provide behavioral data that is useful when combined with other information such as new files written to disk and unusual processes.
Windows Registry: Windows Registry Key Modification
Changes made to a Registry Key and/or Key value (ex: Windows EID 4657 or Sysmon EID 13|14)
Monitor for changes made to windows registry keys or values for unexpected modifications
BADNEWS copies documents under 15MB found on the victim system to is the user's %temp%\SMB\ folder. It also copies files from USB devices to a predefined directory.
Adversaries may stage collected data in a central location or directory on the local system prior to Exfiltration. Data may be kept in separate files or combined into one file through techniques such as Archive Collected Data. Interactive command shells may be used, and common functionality within cmd and bash may be used to copy data into a staging location.
Adversaries may also stage collected data in various available formats/locations of a system, including local storage databases/repositories or the Windows Registry.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments arguments for actions that could be taken to collect and combine files. Remote access tools with built-in features may interact directly with the Windows API to gather and copy to a location. Data may also be acquired and staged through Windows system management tools such as Windows Management Instrumentation and PowerShell.
File: File Access
Opening a file, which makes the file contents available to the requestor (ex: Windows EID 4663)
Monitor processes that appear to be reading files from disparate locations and writing them to the same directory or file may be an indication of data being staged, especially if they are suspected of performing encryption or compression on the files, such as 7zip, RAR, ZIP, or zlib.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor publicly writeable directories, central locations, and commonly used staging directories (recycle bin, temp folders, etc.) to regularly check for compressed or encrypted data that may be indicative of staging.
Windows Registry: Windows Registry Key Modification
Changes made to a Registry Key and/or Key value (ex: Windows EID 4657 or Sysmon EID 13|14)
Consider monitoring accesses and modifications to local storage repositories (such as the Windows Registry), especially from suspicious processes that could be related to malicious data collection.
BADNEWS has a command to take a screenshot and send it to the C2 server.
Adversaries may attempt to take screen captures of the desktop to gather information over the course of an operation. Screen capturing functionality may be included as a feature of a remote access tool used in post-compromise operations. Taking a screenshot is also typically possible through native utilities or API calls, such as CopyFromScreen, xwd, or screencapture.
This type of attack technique cannot be easily mitigated with preventive controls since it is based on the abuse of system features.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments that may attempt to take screen captures of the desktop to gather information over the course of an operation.
Process: OS API Execution
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitoring for screen capture behavior will depend on the method used to obtain data from the operating system and write output files. Detection methods could include collecting information from unusual processes using API calls used to obtain image data, and monitoring for image files written to disk, such as CopyFromScreen, xwd, or screencapture. The sensor data may need to be correlated with other events to identify malicious activity, depending on the legitimacy of this behavior within a given network environment.
BADNEWS monitors USB devices and copies files with certain extensions to a predefined directory.
Once established within a system or network, an adversary may use automated techniques for collecting internal data. Methods for performing this technique could include use of a Command and Scripting Interpreter to search for and copy information fitting set criteria such as file type, location, or name at specific time intervals. In cloud-based environments, adversaries may also use cloud APIs, command line interfaces, or extract, transform, and load (ETL) services to automatically collect data. This functionality could also be built into remote access tools.
This technique may incorporate use of other techniques such as File and Directory Discovery and Lateral Tool Transfer to identify and move files, as well as Cloud Service Dashboard and Cloud Storage Object Discovery to identify resources in cloud environments.
Encrypt Sensitive Information
Encryption and off-system storage of sensitive information may be one way to mitigate collection of files, but may not stop an adversary from acquiring the information if an intrusion persists over a long period of time and the adversary is able to discover and access the data through other means. Strong passwords should be used on certain encrypted documents that use them to prevent offline cracking through Brute Force techniques.
Remote Data Storage
Encryption and off-system storage of sensitive information may be one way to mitigate collection of files, but may not stop an adversary from acquiring the information if an intrusion persists over a long period of time and the adversary is able to discover and access the data through other means.
Monitoring the following activities in your Organization can help you detect this technique.
Command: Command Execution
Invoking a computer program directive to perform a specific task (ex: Windows EID 4688 of cmd.exe showing command-line parameters, ~/.bash_history, or ~/.zsh_history)
Monitor executed commands and arguments for actions that could be taken to collect internal data.
File: File Access
Opening a file, which makes the file contents available to the requestor (ex: Windows EID 4663)
Monitor for unexpected files (i.e. .pdf, .docx, .jpg, etc.) viewed for collecting internal data.
Script: Script Execution
Launching a list of commands through a script file (ex: Windows EID 4104)
Monitor for any attempts to enable scripts running on a system would be considered suspicious. If scripts are not commonly used on a system, but enabled, scripts running out of cycle from patching or other administrator functions are suspicious. Scripts should be captured from the file system when possible to determine their actions and intent.
BADNEWS establishes a backdoor over HTTP.
Adversaries may communicate using application layer protocols associated with web traffic to avoid detection/network filtering by blending in with existing traffic. Commands to the remote system, and often the results of those commands, will be embedded within the protocol traffic between the client and server.
Protocols such as HTTP and HTTPS that carry web traffic may be very common in environments. HTTP/S packets have many fields and headers in which data can be concealed. An adversary may abuse these protocols to communicate with systems under their control within a victim network while also mimicking normal, expected traffic.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor and analyze traffic patterns and packet inspection associated to protocol(s), leveraging SSL/TLS inspection for encrypted traffic, that do not follow the expected protocol standards and traffic flows (e.g extraneous packets that do not belong to established flows, gratuitous or anomalous traffic patterns, anomalous syntax, or structure). Consider correlation with process monitoring and command line to detect anomalous processes execution and command line arguments associated to traffic patterns (e.g. monitor anomalies in use of files that do not normally initiate connections for respective protocol(s)).
Network Traffic: Network Traffic Flow
Summarized network packet data, with metrics, such as protocol headers and volume (ex: Netflow or Zeek http.log)
Monitor for web traffic to/from known-bad or suspicious domains and analyze traffic flows that do not follow the expected protocol standards and traffic flows (e.g extraneous packets that do not belong to established flows, or gratuitous or anomalous traffic patterns). Consider correlation with process monitoring and command line to detect anomalous processes execution and command line arguments associated to traffic patterns (e.g. monitor anomalies in use of files that do not normally initiate connections for respective protocol(s)).
BADNEWS collects C2 information via a dead drop resolver.
Adversaries may use an existing, legitimate external Web service to host information that points to additional command and control (C2) infrastructure. Adversaries may post content, known as a dead drop resolver, on Web services with embedded (and often obfuscated/encoded) domains or IP addresses. Once infected, victims will reach out to and be redirected by these resolvers.
Popular websites and social media acting as a mechanism for C2 may give a significant amount of cover due to the likelihood that hosts within a network are already communicating with them prior to a compromise. Using common services, such as those offered by Google or Twitter, makes it easier for adversaries to hide in expected noise. Web service providers commonly use SSL/TLS encryption, giving adversaries an added level of protection.
Use of a dead drop resolver may also protect back-end C2 infrastructure from discovery through malware binary analysis while also enabling operational resiliency (since this infrastructure may be dynamically changed).
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level.
Restrict Web-Based Content
Web proxies can be used to enforce external network communication policy that prevents use of unauthorized external services.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor and analyze traffic patterns and packet inspection associated to protocol(s) that do not follow the expected protocol standards and traffic flows (e.g extraneous packets that do not belong to established flows, gratuitous or anomalous traffic patterns, anomalous syntax, or structure). Consider correlation with process monitoring and command line to detect anomalous processes execution and command line arguments associated to traffic patterns (e.g. monitor anomalies in use of files that do not normally initiate connections for respective protocol(s)).
Network Traffic: Network Traffic Flow
Summarized network packet data, with metrics, such as protocol headers and volume (ex: Netflow or Zeek http.log)
Monitor network data for uncommon data flows. Processes utilizing the network that do not normally have network communication or have never been seen before are suspicious.
BADNEWS can use multiple C2 channels, including RSS feeds, Github, forums, and blogs.
Adversaries may use an existing, legitimate external Web service as a means for sending commands to and receiving output from a compromised system over the Web service channel. Compromised systems may leverage popular websites and social media to host command and control (C2) instructions. Those infected systems can then send the output from those commands back over that Web service channel. The return traffic may occur in a variety of ways, depending on the Web service being utilized. For example, the return traffic may take the form of the compromised system posting a comment on a forum, issuing a pull request to development project, updating a document hosted on a Web service, or by sending a Tweet.
Popular websites and social media acting as a mechanism for C2 may give a significant amount of cover due to the likelihood that hosts within a network are already communicating with them prior to a compromise. Using common services, such as those offered by Google or Twitter, makes it easier for adversaries to hide in expected noise. Web service providers commonly use SSL/TLS encryption, giving adversaries an added level of protection.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level.
Restrict Web-Based Content
Web proxies can be used to enforce external network communication policy that prevents use of unauthorized external services.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Connection Creation
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for newly constructed network connections that are sent or received by untrusted hosts.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor and analyze traffic patterns and packet inspection associated to protocol(s) that do not follow the expected protocol standards and traffic flows (e.g extraneous packets that do not belong to established flows, gratuitous or anomalous traffic patterns, anomalous syntax, or structure). Consider correlation with process monitoring and command line to detect anomalous processes execution and command line arguments associated to traffic patterns (e.g. monitor anomalies in use of files that do not normally initiate connections for respective protocol(s)).
Network Traffic: Network Traffic Flow
Summarized network packet data, with metrics, such as protocol headers and volume (ex: Netflow or Zeek http.log)
Monitor network data for uncommon data flows. Processes utilizing the network that do not normally have network communication or have never been seen before are suspicious.
BADNEWS is capable of downloading additional files through C2 channels, including a new version of itself.
Adversaries may transfer tools or other files from an external system into a compromised environment. Tools or files may be copied from an external adversary-controlled system to the victim network through the command and control channel or through alternate protocols such as ftp. Once present, adversaries may also transfer/spread tools between victim devices within a compromised environment (i.e. Lateral Tool Transfer).
Files can also be transferred using various Web Services as well as native or otherwise present tools on the victim system.
On Windows, adversaries may use various utilities to download tools, such as copy, finger, and PowerShell commands such as IEX(New-Object Net.WebClient).downloadString() and Invoke-WebRequest. On Linux and macOS systems, a variety of utilities also exist, such as curl, scp, sftp, tftp, rsync, finger, and wget.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware or unusual data transfer over known protocols like FTP can be used to mitigate activity at the network level. Signatures are often for unique indicators within protocols and may be based on the specific obfuscation technique used by a particular adversary or tool, and will likely be different across various malware families and versions. Adversaries will likely change tool C2 signatures over time or construct protocols in such a way as to avoid detection by common defensive tools.
Monitoring the following activities in your Organization can help you detect this technique.
File: File Creation
Initial construction of a new file (ex: Sysmon EID 11)
Monitor for file creation and files transferred into the network
Network Traffic: Network Connection Creation
Initial construction of a WMI object, such as a filter, consumer, subscription, binding, or provider (ex: Sysmon EIDs 19-21)
Monitor for newly constructed network connections that are sent or received by untrusted hosts or creating files on-system may be suspicious. Use of utilities, such as FTP, that does not normally occur may also be suspicious.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor network traffic content for files and other potentially malicious content, especially data coming in from abnormal/unknown domain and IPs.
Network Traffic: Network Traffic Flow
Summarized network packet data, with metrics, such as protocol headers and volume (ex: Netflow or Zeek http.log)
Monitor network data for uncommon data flows (e.g., a client sending significantly more data than it receives from a server). Processes utilizing the network that do not normally have network communication or have never been seen before are suspicious.
After encrypting C2 data, BADNEWS converts it into a hexadecimal representation and then encodes it into base64.
Adversaries may encode data to make the content of command and control traffic more difficult to detect. Command and control (C2) information can be encoded using a standard data encoding system. Use of data encoding may adhere to existing protocol specifications and includes use of ASCII, Unicode, Base64, MIME, or other binary-to-text and character encoding systems. Some data encoding systems may also result in data compression, such as gzip.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level. Signatures are often for unique indicators within protocols and may be based on the specific obfuscation technique used by a particular adversary or tool, and will likely be different across various malware families and versions. Adversaries will likely change tool C2 signatures over time or construct protocols in such a way as to avoid detection by common defensive tools.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor for network data for uncommon data flows (e.g., a client sending significantly more data than it receives from a server). Processes utilizing the network that do not normally have network communication or have never been seen before are suspicious. Analyze packet contents to detect communications that do not follow the expected protocol behavior for the port that is being used.
BADNEWS encodes C2 traffic with base64.
Adversaries may encode data with a standard data encoding system to make the content of command and control traffic more difficult to detect. Command and control (C2) information can be encoded using a standard data encoding system that adheres to existing protocol specifications. Common data encoding schemes include ASCII, Unicode, hexadecimal, Base64, and MIME. Some data encoding systems may also result in data compression, such as gzip.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level. Signatures are often for unique indicators within protocols and may be based on the specific obfuscation technique used by a particular adversary or tool, and will likely be different across various malware families and versions. Adversaries will likely change tool C2 signatures over time or construct protocols in such a way as to avoid detection by common defensive tools.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor for network data for uncommon data flows (e.g., a client sending significantly more data than it receives from a server). Processes utilizing the network that do not normally have network communication or have never been seen before are suspicious. Analyze packet contents to detect communications that do not follow the expected protocol behavior for the port that is being used.
BADNEWS encrypts C2 data with a ROR by 3 and an XOR by 0x23.
Adversaries may employ a known symmetric encryption algorithm to conceal command and control traffic rather than relying on any inherent protections provided by a communication protocol. Symmetric encryption algorithms use the same key for plaintext encryption and ciphertext decryption. Common symmetric encryption algorithms include AES, DES, 3DES, Blowfish, and RC4.
Network Intrusion Prevention
Network intrusion detection and prevention systems that use network signatures to identify traffic for specific adversary malware can be used to mitigate activity at the network level.
Monitoring the following activities in your Organization can help you detect this technique.
Network Traffic: Network Traffic Content
Logged network traffic data showing both protocol header and body values (ex: PCAP)
Monitor and analyze traffic patterns and packet inspection associated to protocol(s) that do not follow the expected protocol standards and traffic flows (e.g extraneous packets that do not belong to established flows, gratuitous or anomalous traffic patterns, anomalous syntax, or structure). Consider correlation with process monitoring and command line to detect anomalous processes execution and command line arguments associated to traffic patterns (e.g. monitor anomalies in use of files that do not normally initiate connections for respective protocol(s)).
Copyright © 2022 AshwinPro